Filling the Screw Hole on a Dental Implant in Nowon: How Does It Work?
Filling the screw hole on a dental implant means sealing the empty space that sits above the screw head in a screw-retained restoration (crown), then smoothing the surface with a protective material and resin. Because the crown is held by a tightened screw rather than glue, a small opening is left, and the finish is completed only after the bite has been checked. Below is when it is needed, the general order of steps, and points worth reviewing so you understand the procedure.
What Does Filling the Screw Hole on a Dental Implant Mean?
Filling the screw hole is the finishing step that covers the space above the screw head in a screw-retained restoration with a protective material and resin.
Filling the screw hole on a dental implant refers to the step of packing the opening that holds the screw head and smoothing the surface. Implant restorations fall into two main types: those attached with dental cement and those held in place by a tightened screw. The screw-retained type leaves a small opening on the chewing surface where the screw goes in — think of it as a little access hatch on top of the crown.
If this opening is left as is, food can get trapped or the chewing surface can feel uncomfortable. So after the screw is tightened to the right amount, the space above it is filled with a protective material and dental resin. The screw is not removed for good; the finish covers only the top of the screw so it can be reopened later if needed.
In What Order Is a Dental Implant Screw Hole Filled?
The order is tighten the screw → pack the protective material → finish with resin → check the bite, and the details vary from person to person.
Usually the screw is tightened to a set force, then the empty space above the screw head is packed with a protective material, and resin is placed over it and the bite is adjusted. The outline below is a rough flow to help you understand the process; the actual method and materials vary with the type of restoration and the condition of your mouth.
The details of each step vary from patient to patient, and the finishing method changes depending on the chewing force and where the screw sits.
- The screw is tightened to an appropriate force to fix the restoration to the implant.
- A protective material is placed in the empty space above the screw head to cover the screw, allowing it to be reopened later.
- Dental resin is placed over it and shaped to match the height of the chewing surface.
- The bite (how the upper and lower teeth meet) is checked, and any high or uncomfortable spots are adjusted.
What Should You Look At When a Screw Hole Is Filled on a Nowon Dental Implant?
To understand this process, it helps to check for yourself whether your restoration is the screw-retained type and how the filled area should be cared for. Below are questions worth reviewing once before and once after your visit. This is not about which clinic is better — it is meant to help you understand the procedure itself.
- Whether your implant restoration is held by a screw or attached with cement
- Whether the filled area is built so it can be reopened later if needed
- Whether the resin-finished spot feels high or foreign when you chew
- How to clean and care for that area in daily life
- Whether regular check-ups review both the screw's tightness and the finished area
When Do You Need an Examination or Consultation?
If discomfort continues or you notice signs such as looseness or pain, it is safer not to leave it alone and to confirm the cause through a consultation.
If the filled area stays uncomfortable or you notice any of the signs below, it is a good idea to have a consultation. With a screw-retained restoration, the screw can loosen or the finished area can wear down over time, so it helps to have it checked when symptoms appear.
In particular, if it feels loose or clicks when you chew, have it looked at rather than putting it off. Symptoms and their causes vary from person to person, so it is safer to confirm an accurate assessment through an examination in person.
- Consultation recommended the filled area comes out often or food keeps getting trapped
- Consultation recommended a high spot or foreign feeling remains when you chew
- Prompt check recommended the restoration feels loose or clicks
- Prompt check recommended the gum swells, or pain or bleeding recurs
What Kind of Place Is Nowon Design Dental Clinic?
Nowon Design Dental Clinic (business name: Design Dental Clinic) is located at 5F, Jungang Building, 491 Nohae-ro, Nowon-gu, Seoul, South Korea, a 3-minute walk from Exit 2 or 4 of Nowon Station on Seoul Subway Lines 4 and 7. It is the building on the left at the entrance to Nowon Culture Street, between Lotte Department Store and Wow Shopping Mall. The main phone number is 02-931-2875, and its services are dental implants, no-prep veneers, Seraphin clear aligner treatment, and professional teeth whitening.
Three directors see patients in one space, and for cases where implant, restorative, and orthodontic care overlap, they discuss the case together to decide the order of treatment. The basis for the diagnosis is reviewed together on screen, and what to treat now is explained separately from what to keep watching. Costs are explained before treatment begins, and nothing proceeds without your consent.
What Are the Clinic Hours?
Clinic hours are Monday, Wednesday, and Friday 10:00–19:00; Tuesday and Thursday 10:00–21:00 (evening hours); and Saturday 10:00–14:00, with no lunch break on Saturday. The weekday lunch break is 13:00–14:30, and the clinic is closed on Sundays and public holidays. Because there is no dedicated parking in the building, nearby parking is offered (Lotte Department Store Nowon branch, Hwarang Building, and the Sanggye Jugong Complex 6 and 7 public street parking lot).
References
- 대한치과의사협회 — 전문가 단체 안내 (전문가 합의)
- 질병관리청 국가건강정보포털 — 공공 건강정보 (공공기관 안내)
Appointments and inquiries: 노원디자인치과
The clinic's booking page is in Korean.
Book or ask on Naver